York Packaged Units official logo

York Packaged Units

York packaged units deliver reliable heating and cooling performance with advanced technology, energy efficiency, and flexible installation options for commercial applications.

Ask about York Packaged Units

york HVAC Assistant

Powered by equipment specifications and industry knowledge

Live

Hello! I'm your HVAC assistant specializing in York Packaged Units. How can I help you today?

05:15 PM

Suggested questions:

AI-powered responses based on york technical specifications, industry standards, and common practices

Popular Models

Affinity
Performance
Excellence
YVAA
YVFA

Technical Specifications

Capacity & Efficiency

Cooling Capacity:3-130 tons
Heating Capacity:36,000-1,560,000 BTU/h
Efficiency Ratings:
SEER: Up to 16.0
IEER: Up to 16.0
COP: Up to 4.0

Airflow & Pressure

Airflow Range:1,200-52,000 CFM
Static Pressure:0.5-4.0 in. w.c.
Sound Level:65-85 dBA at 3 feet

Dimensions

Length:8-40 feet
Width:4-12 feet
Height:4-12 feet
Weight:800-12,000 lbs

Power Requirements

Voltage:208/230/460/575V
Phase:3-phase
Frequency:60 Hz

Common Issues & Solutions

Economizer damper failure

Symptoms:

Dampers stuck open/closed, poor ventilation control, excess outside air, high energy consumption

Solution:

Inspect actuator and linkage, check controller operation, verify sensor readings, lubricate moving parts, recalibrate minimum position, replace actuator or controller if defective.

Gas furnace ignition problems

Symptoms:

No heat, furnace lockout, multiple ignition attempts, error codes on control board

Solution:

Check igniter for cracks/damage, verify proper gas pressure, inspect flame sensor for corrosion, test all safety switches, clean flame sensor, replace igniter or other components as needed.

Refrigerant circuit restrictions

Symptoms:

Reduced cooling capacity, ice buildup on evaporator, high superheat, low subcooling

Solution:

Check filter-drier for restrictions, inspect expansion device for proper operation, verify refrigerant charge, test pressure drop across suspected restrictions, replace components as necessary.

Cost Information

ServiceAverage CostCost Factors
Annual maintenance contract$600-$1,800Unit size, service frequency, filter replacement inclusion, geographic location
Commercial unit replacement$8,000-$35,000Unit capacity, efficiency level, installation complexity, crane requirements
Heat exchanger replacement$2,500-$6,000Unit size, heat exchanger design, access constraints, labor rates
Controls upgrade$1,500-$5,000Controller type, extent of upgrades, integration requirements, programming needs

Frequently Asked Questions

What configurations are available in York packaged units?

York offers multiple configurations including gas/electric (gas heating with electric cooling), electric/electric (heat pump with electric backup), cooling-only with optional electric heat, and dual-fuel models. Units range from 3-25 tons and are available in horizontal or downflow (vertical) airflow arrangements.

What makes York's Simplicity® Smart Equipment control system advantageous?

York's Simplicity® controls feature plug-and-play setup that reduces commissioning time, built-in diagnostics with over 100 fault codes, BACnet/Modbus/LonWorks compatibility for BMS integration, mobile access through the Simplicity® Smart Equipment App, and predictive diagnostics that identify potential issues before they cause failures.

How energy efficient are York packaged units?

York packaged units range from standard efficiency models (up to 14 SEER) to high-efficiency units exceeding 17 SEER and 12.5 EER. Efficiency features include multi-stage compressors, ECM indoor motors, advanced economizers, and microchannel condenser coils that improve heat transfer while reducing refrigerant charge.

What options are available for improving indoor air quality with York packaged units?

York offers several IAQ options including MERV 13 filtration, UV germicidal lights, electrostatic air cleaners, humidification options, CO2 sensors for demand-controlled ventilation, and energy recovery modules that precondition outside air while removing contaminants.

Related Brands