Trane Packaged Units official logo

Trane Packaged Units

Trane packaged units combine heating and cooling in a single, space-saving cabinet, offering versatile installation options with Trane's legendary reliability and efficiency.

Ask about Trane Packaged Units

trane HVAC Assistant

Powered by equipment specifications and industry knowledge

Live

Hello! I'm your HVAC assistant specializing in Trane Packaged Units. How can I help you today?

05:15 PM

Suggested questions:

AI-powered responses based on trane technical specifications, industry standards, and common practices

Popular Models

Precedent
IntelliPak
Voyager
Foundation
Odyssey

Technical Specifications

Capacity & Efficiency

Cooling Capacity:3-30 tons (36,000-360,000 BTU/h)
Heating Capacity:40,000-400,000 BTU/h
Efficiency Ratings:
SEER: Up to 16.0
IEER: Up to 16.0
COP: Up to 3.8

Airflow & Pressure

Airflow Range:1,200-12,000 CFM
Static Pressure:0.5-3.5 in. w.c.
Sound Level:65-85 dBA at 3 feet

Dimensions

Length:40-180 inches
Width:30-80 inches
Height:40-65 inches
Weight:500-3,000 lbs

Power Requirements

Voltage:208/230/460/575V
Phase:3-phase
Frequency:60 Hz

Common Issues & Solutions

Economizer damper failure

Symptoms:

Stuck dampers, excessive outdoor air, inadequate ventilation, increased energy consumption

Solution:

Lubricate damper linkages, check actuator operation, verify proper end switches, calibrate minimum position, inspect outdoor air sensors, check economizer controller, replace worn components.

Gas heat exchanger issues

Symptoms:

Insufficient heating, frequent cycling, limit switch tripping, unusual flame pattern, CO production

Solution:

Inspect heat exchanger for cracks/corrosion using camera, check proper gas pressure, verify flame sensor operation, test limit switches, ensure proper combustion air, replace heat exchanger if compromised.

Compressor electrical problems

Symptoms:

Compressor not starting, tripped breaker, contactor chatter, unusual electrical hum

Solution:

Check voltage to unit and at compressor terminals, inspect contactor for wear, test start/run capacitors, verify proper phasing on three-phase units, check potential relay on single-phase units.

Cost Information

ServiceAverage CostCost Factors
Annual maintenance contract$600-$2,000 per unitUnit size, service frequency (quarterly/semi-annual), filter changes inclusion, economizer service
Compressor replacement$2,000-$7,000Compressor size/type, refrigerant, warranty status, accessibility, labor rates
Packaged unit replacement (commercial)$10,000-$60,000Unit capacity, efficiency level, advanced features, curb adaptation, ductwork modifications
Control system upgrade$2,500-$8,000Controller model, sensors, interface options, programming complexity, BAS integration

Frequently Asked Questions

What configurations are available in Trane packaged units?

Trane offers several configurations including gas/electric (gas heating with electric cooling), electric/electric (heat pump with electric backup), cooling-only with optional electric heat, and dual-fuel models (heat pump with gas backup). Capacities range from 3-130 tons with horizontal or downflow discharge options.

What makes Trane's IntelliPak packaged units different from standard models?

IntelliPak units feature modular construction for easier service, Adaptive Control™ with proactive diagnostics, multiple compressor staged cooling for improved efficiency, direct-drive plenum fans with backward-curved impellers, hinged access panels, and Trane's UC800 programmable controller with BACnet/LonTalk/Modbus compatibility.

How energy efficient are Trane packaged units?

Trane's packaged units range from standard efficiency (up to 14 SEER) to high-efficiency models exceeding 16 SEER and 12.5 EER. Energy-saving features include multi-stage compressors, variable-speed indoor fans, economizers for free cooling, enhanced coil designs, and advanced digital controls for optimum performance.

What control options are available for Trane packaged rooftop units?

Trane offers multiple control options including Symbio 800 controllers with touchscreen interface, stand-alone thermostats, zone sensor modules, BAS integration modules, Tracer SC+ building automation, and Trane Connect remote services for cloud-based monitoring, diagnostics, and optimization.

Related Brands